Sunday, November 1, 2020

Sewing Tutorial: Sleeping Mask

 My daughter had a great idea: sleeping masks as party favors for a sleepover. They're not hard to make either! You can even embroider a fun design on the fabric prior to cutting and sewing.

Try to guess her favorite animal.

SUPPLIES

Elastic (I used 1/2' wide knit)
Less than a fat quarter's worth of flannel
Tracing paper or similar

Washed, ironed, and all the boring prep, of course.

DIRECTIONS

Take a couple measurements of the person you're making the sleeping mask for: temple-to-temple around the front of the face, and temple-to-temple around the back of the head. For my late-elementary aged child who wears a size 12, those measurements were 9 inches (23 cm) and 15 inches (38 cm).

Next, cut a template for the mask, making it a touch longer than your first measurement.

You could just do a rectangle, but a little shaping is nicer.

Fold it in half and check for symmetry, trimming if needed.

Trace the mask template on your flannel (if you want an embroidery design, do that prior to cutting) and cut out two per mask. Also cut a piece of elastic the length of your second measurement.

If you have embroidered something, be sure to center it.
I found that a 10x10 inch (25x25cm) square was 
a great size for hooping for embroidery,
and yielded fabric for one mask.
Now, layer the two pieces of flannel and the elastic. The flannel will be right sides together with the elastic in the middle. Be careful to place the elastic so that it will be evenly attached on both sides AND so that you won't sew over more than just the two spots where it will be attached (at either temple). Pin or clip the layers in place.
The elastic just barely extends past the edges of the flannels.
Now, sew around the perimeter, leaving a little space for turning.
Be sure you catch all layers, especially where the elastic is.
Turn right side out, iron, and top stitch around the entire perimeter.
I made this seam narrower than the previous one.
Another quick press with the iron and some thread trimming, and you're done!
Good night!

No comments:

Post a Comment